Product Introduction
This latest microwave sensor switch is a sensor to sense moving objects, its detection range is 360 degrees without dead angle,
the working frequency is 5.8GHZ, it works in a very stable state, due to the use of microwave sensors so the safety coefficient is
extremely high, the performance even exceeds the infrared sensor. It can support the installation of products made of glass or
plastic, because these materials are the impact of the sensor is minimal. Power on when people come and power off when people
leave, which can play a good role in energy saving. Sensing distance, delay, brightness can be adjusted, more flexible, and is made
of flame-retardant material to further improve safety performance.
| Product Brand |
GTD |
| Working Voltage |
12V-24V DC |
| Operating Frequency |
5.8GHz |
| Detection Range |
2-10m |
| Detection Angle |
360° |
| Delay Time |
5sec-5mins |
| Installation Method |
Ceiling-Mounted |
| Sensing Distance |
0.5m-20m |
Product Parameters
Applicable Scenarios
This product is mainly used in intelligent guest room projects such as hotels, guesthouses, home stays, villas, clubs, apartments,
hospitals, etc.
High Sensitivity and Wide Range
Using the Doppler principle, the automatic all-round detection sensing distance is 2-8m, combined with light sensing and radar
microwave sensing. The light intensity is below 12-15LUX, and the built-in light control switch is activated without sensing during
the day.
Low-power Consumption
The product comes with a built-in light control, which will be in a locked state during the day or in environments with strong light,
and will not provide light. Even if someone is within its sensing range, it will not light up. Being on standby in a dimly lit environment
plays a role in energy conservation and power saving.
Microwave Radar Induction
Radar emits pulses to scan the air, which can detect the position, speed, and distance of moving objects. Can filter out noisy
interference signals and accurately locate target signals.
Product Function Settings
Installation Steps
1. Rotate the top cover counterclockwise to remove it (see Figure 1). 2. Place the base against the wall and make a drilling mark,
paying attention to the leads on the wall (see Figure 2) 3. Drill a hole and knock the plastic expansion material into the hole
(see Figure 3). 4. Thread the power cord through the bottom cover (see Figure 4) 5. Fix the base in the selected installation position
with installation screws (see Figure 5). 6. Connect the power and load wires to the wiring terminals according to the wiring markings.
7. Turn the switch, set the required parameters, and tighten the upper cover clockwise. (See Figure 5)
Note: The high-frequency output of this sensor is less than 0.2mW
Product Wiring Diagram
Product Size Information
Company Profile
GTD is specialized in professional design, development and manufacture of hotel art nice various high-grade intelligent push
button or touch button wall switch panels, energy-saving card switches, electronic doorbell, LED doorplate system, wall sockets,
smart room control GRMS system RCU, hotel intelligent door lock, etc.
PRODUCT CERTIFICATION DOCUMENTS(Parts)
Feedback
Frequently Asked Question
Question1:How is the quality? A:Quality is priority. We pay much attention to the quality check. Every product will be fully
assembled and carefully tested before it's packed for shipment.
Question2:Can I customize products? A:Yes. Customization is including Size/structure/function/material/color/technology/
LOGO/icons words printed etc. Just as your real project need.
Question3:How to order? A:Step 1, please tell us what model and quantity you need; Step 2, then we will help you confirm
the order details; Step 3, when we confirmed everything, then can arrange the payment; Step 4, finally we deliver the goods
within the appointed time.
Question4: Can I get a sample? A:Yes, real sample order and real using testing is available.
Question5: What kind of packaging do you use? A:Each product have protect film packaging, then to the paper box, then
to paper cartons, but we also customize packaging for our OEM customers.
Question6: What is your shipping methods? A:We use UPS, DHL, FedEx, EMS, TNT or the shipping agent as your request.
Product Introduction
){kind=link}
){kind=link}