| Customization: | Available |
|---|---|
| Type: | Microwave Sensor Switch |
| Principle: | Microwave Radar Technology |
|
Still deciding? Get samples of US$ 10/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Human Body Induction
Doppler Switch Sensor, Detailed Specifications as Followed:
Operating voltage: 220-240V AC
Related load: 400W (Max. inductive load)/800W (Max. Resistive load)
Detection area: 2-10 meters
Time setting: 10sec-12min
Light control: 2-2000lux, can be customized
Microwave frequency: 5.8GHz+/-75MHz
Transmission power: <0.2mW
Installation: ceiling mounting
Detection angle: 360°
Mounting height: Max. 5m
Operating temperature: -10ºC-60ºC
Size: 95*95*43mmInstallation Procedure
1. Take down the top cover by turning it anti-clockwise
2. Hold base against the wall and mark drill holes, paying attention to any existing wiring in the wall
3. Drill the holes, insert wall plug
4. Put the power wire and load wire throughthe base holes
5. Screw the base into place
6. Connect the mains power supply and the load wire to the connection terminal according to connection-wire mark
7. Fit glass shad and turn it clockwiseHidden Radar Sensor
Hidden radar sensor has below advantages: active detection (sensitive and accurate), intelligent microwave sensor (hidden not exposed), can penetrate different thickness wall, (8-12m) farther, wide angle, no dead zone, not affected by environment, temperature, dust, etc.
Setting
1. Detection range setting (sensitivity): detection range is the term used to describe the diameter to the more or less circular detection zone produced on the ground after mounting the sensor light at a height of 2.5m, turn the detection control fully anti-clockwide to select minimum detection range (approx. 2m), and fully clockwise to select maximum detection range (approx. 10m).
2. Time setting: the light can be set to stay on for any period of time between approx. 10sec (turn fully anti-clockwise) and a maximum of 12min (turn fully clockwise). Any movement detected before this time elapse will re-start the timer. It is recommended to select the shortest time for adjusting the detectionzone and for performing the wakl test.
3. Light-control setting: the chosen light response threshold can be infinitely from approx. 2-2000lux. Turn it fully anti-clockwise to select dusk to dawn operation at about 2 lux. Turn it fully clockwise to select daylight operation at about 2000lux. The knob must be turned fully clockwise when adjusting the detection zone and performing the walk test in daylight.Warning!
1. Being installed in the rocking object will lead to misoperation.
2. The shaking curtain which is blown by wind will lead to misoperation, please select the suitable installed place.
3. Being installed in the palce where the traffic is busy will lead to misoperation.
4. It will lead to misoperation when there are sparks produced by some equipment nearby.
){kind=link}